Champion Blue Ribbon Gaskets

Home › Forum › Ask A Member › Champion Blue Ribbon Gaskets

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 16, 2026 at 11:35 am #322201
    Joseph Wood
    Participant

      US Member

      I am rebuilding a 1947 Champion blue ribbon 2J outboard. For obvious reasons, most of the gaskets have deteriorated to nothing. Any recommendations on where I could get a set of gaskets?

      June 16, 2026 at 12:13 pm #322202
      RICHARD A. WHITE
      Participant

        Lifetime Member

        Welcome Joseph,

        A set would be awesome, but realistically, head to NAPA and buy the proper thickness material and make your own. It is easier than you think and many of us already do that. Buy a protractor with a pencil and that is used to make circles.. A good pair of scissors, some various sized hole punches for clearance holes and Bob’s yer uncle!

        Richard

        http://www.richardsoutboardtools.com
        classicomctools@gmail.com

        June 16, 2026 at 1:23 pm #322207
        Buccaneer
        Participant

          US Member

          You could check johnfolke
          on Ebay. He makes nice gaskets.

          Prepare to be boarded!

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.