Johnson HD25

Home › Forum › Ask A Member › Johnson HD25

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 12, 2019 at 4:44 pm #189251
    scott5560
    Participant

      I found info on another site for the leather pump seals.

      “Send $8.00 per set (cash only, no checks) and SASE (self addressed stamped envelope) to: Lloyd Lautner, 9289 North Long Lake Road, Traverse City, Michigan 49685”

      Does anyone know if this link is still good???

      Thanks
      Scott

      December 12, 2019 at 5:06 pm #189252
      crosbyman
      Participant

        Canada Member - 2 Years

        yes loyd sells these leather seals ….some have used o-rings instead but I am not sure they areas good

        Joining AOMCI has priviledges 🙂

        December 12, 2019 at 8:29 pm #189270
        lloyd
        Participant

          US Member

          Yes that is me. But the price went up to $10.00 per set a few years ago. Difficult to get the proper oil tanned leather to make more. Just sent out 2 sets today. o-rings won’t work. Been there done that.The included instructions with diagrams of the assembly are alone worth the cost.

          December 13, 2019 at 5:33 pm #189282
          scott5560
          Participant

            Thank-you Lloyd. I will try to get the envelope in the mail next week. They will be going to Ontario, Canada.

            Thanks for the other replies as well.

            Scott
            Ontario, Canada

            December 14, 2019 at 1:17 pm #189316
            crosbyman
            Participant

              Canada Member - 2 Years

              don’t forget seal orientation…

              Joining AOMCI has priviledges 🙂

              December 14, 2019 at 4:21 pm #189334
              lloyd
              Participant

                US Member

                Thanks Crosbyman. My instructions and diagrams show exactly how to install the seals, convex and concave brass washers, and all the other parts of the primer. And also how to take care of common problems during disassembly and assembly. I am very happy to report that in 20 years of providing the seals I have not once had a person that couldn’t do the repair successfully. And my diagrams show the parts in cross section so they are even clearer than the picture you have provided.

                December 14, 2019 at 9:41 pm #189349
                reivertom
                Participant

                  US Member

                  deleted

                  • This reply was modified 4 years, 4 months ago by reivertom.
                  December 14, 2019 at 11:42 pm #189357
                  crosbyman
                  Participant

                    Canada Member - 2 Years

                    Loyd… agree I just added picture as a precaution .

                    btw I purchased your seals for my tn27 🙂 …about 2 years ago

                    Joining AOMCI has priviledges 🙂

                    • This reply was modified 4 years, 4 months ago by crosbyman.
                  • Author
                    Posts
                  Viewing 8 posts - 1 through 8 (of 8 total)
                  • You must be logged in to reply to this topic.