Oil seals

[Steve Martin]

Has anyone put together a cross reference table of oil seals?  It would sure be useful and make a good sticky.

[WillinMKE]

Like the attached? Credit to Steve D:

https://www.aomci.org/forums/topic/303345-prop-shaft-skf-equivalent/page/2/#post-275850

[Steve Martin]

Thanks.  That’s a great chart but only references OMC to Sierra.  I was hoping there was a reference to National, SK, CR, etc.

[RICHARD A. WHITE]

I have a book of SKS seals at home…lists everything they made up to that point…

http://www.richardsoutboardtools.com
classicomctools@gmail.com

[Bob Wight]

And here’s a couple of charts for O-ring cross references.

Bob

1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1955 Johnson QD-16
1957 Evinrude Fastwin 18
1957 Evinrude 3022
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20
1982 Evinrude 25hp

“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."

[seakaye12]

https://www.skfextranet.com/crsealsfinder/

That’s a handy resource.  Use the “Interchange” setting and put your original part numbers in there.  The site can also give you specs for each seal.

1 user thanked author for this post.

Tubs

[Steve Martin]

Good stuff.  Thanks to all.

[Author]

Posts