Parts Source for Elto Pal

Home › Forum › Ask A Member › Parts Source for Elto Pal

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 28, 2017 at 12:39 am #8556
    mike-stroz
    Participant

      I figured out what’s wrong with my Elto Pal, and it’s not good… The lower bearing in the power head is completely worn out, probably about 1/16" of play side to side. I’m wondering if anyone knows where I can find either a bearing or the whole assembly in the picture below. I’m thinking I probably need the assembly because heat, Marvel Mystery Oil, and an hour of bashing didn’t seen to do anything to separate them. I’d like to save the motor rather than parting it out because everything else on it is so nice

      https://imgur.com/8Xb5DZD

      October 28, 2017 at 3:45 am #66715
      The Boat House
      Participant

        That bearing is cast into the aluminum.
        In this video I have cut one open to show
        how its made.
        https://www.youtube.com/watch?v=cSZO047tTkk

        October 28, 2017 at 10:56 am #66718
        mike-stroz
        Participant

          Ok, I guess that’s doubly bad because the housing seems to have broken free and can rotate side to side quite a bit.

          October 28, 2017 at 3:53 pm #66727
          The Boat House
          Participant

            Sent you a PM.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.