1925 Johnson A-25

Home › Forum › Ask A Member › 1925 Johnson A-25

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 12, 2018 at 2:37 am #9400
    jcrigan
    Participant

      The weather here was good today so ran some motors. This Johnson A-25 started right up after sitting for several years. Noticed the prop and nut missing after removing motor from test barrel. The prop shaft isn’t drilled for a cotter key to hold the prop nut in place. How do I keep from losing that nut when I run the motor?

      March 12, 2018 at 5:51 am #72394
      Mumbles
      Participant

        The operators manual says there should be two nuts, a flat one and a locking acorn nut.

        Attachments:

        March 12, 2018 at 7:13 am #72395
        jcrigan
        Participant

          Thanks Mumbles. That makes sense.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.