1949 Firestone 7.5hp

Home › Forum › Ask A Member › 1949 Firestone 7.5hp

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 15, 2018 at 7:45 pm #11563
    john41
    Participant

      Serial # 4913-477398, Code # 133-9-4913.
      The motor is in good shape,I’m looking for the basic rebuild parts; water pump impeller, lower pump seal, prop shaft grease seal, spark plug hoods, lead wires, condensers. Lastly, a pull starter assembly would be great. Any tips on parts is greatly appreciated.

      October 16, 2018 at 5:14 am #84480
      seakaye12
      Participant

        US Member

        You might find that Discount Marine Parts in Wisconsin can help you.

        http://www.discount-marine-parts.com/

        Spark plug wire can be had at Napa or O’Reilly…..7mm Copper Core Wire.

        For the Pull starter assembly…about all you can do is check e-bay and place a free ad here in the Classified section. Be sure to read the ad guidelines first.

        Good Luck.

        I did a quick Google search for your model number and this site comes up; looksa like they have the recoil…..

        http://www.thebrazilianconnection.com/4 … parts.html

        October 16, 2018 at 5:31 am #84481
        david-bartlett
        Participant

          I have had good dealings with Brazilianconnection.

          October 16, 2018 at 12:40 pm #84483
          john41
          Participant

            Thanks so much for the help!

            October 16, 2018 at 3:27 pm #84488
            outbdnut2
            Participant

              US Member

              John – You probably already know that your Firestone was made by Scott-Attwater. Many parts interchange.

              Dave

              October 17, 2018 at 3:00 am #84510
              david-bartlett
              Participant

                There may be some information that would help on this thread.

                viewtopic.php?f=2&t=17640

                October 17, 2018 at 1:19 pm #84520
                jim-moffatt
                Participant

                  US Member - 2 Years

                  Water pump impellers are available from club member Bob Long in WA state.
                  Condensers are sold on Ebay, look for Elgin and Scott condensers.
                  I think the lower seals are both 1/2 ID and approx 1 OD and 1/4 thick, they can be ordered from NAPA or go online to Chicago Rawhide.
                  Brillman makes exact repro spark plug hoods available on line. Also available from the Martin SIG leader.
                  Plug wire is available at NAPA just make sure it is copper core.

                • Author
                  Posts
                Viewing 7 posts - 1 through 7 (of 7 total)
                • You must be logged in to reply to this topic.