1951 & 52′ Evinrude 14 HP

Home › Forum › Ask A Member › 1951 & 52′ Evinrude 14 HP

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 21, 2018 at 3:22 pm #9992
    johng
    Participant

      US Member - 2 Years

      What are the initial Carb settings on this motor ? Thanks jr

      May 21, 2018 at 5:13 pm #76495
      frankr
      Participant

        US Member

        3/4 turn on both ought to get it going. An interesting thing on that type carb is the slow speed needle screws IN to make it richer—-backwards from most carbs. Having said that, a FEW motors put left hand threads on the needle to correct for the backwards-ness. Not sure if this is one of those or not.

        May 21, 2018 at 6:46 pm #76500
        johng
        Participant

          US Member - 2 Years

          Thanks Frank, will give it a try. Gave up on it last fall would not stay running. Just stripped the carb again found nothing out of sorts. Tank is rebuilt. Will give it another try. jr

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.