1956 Evinrude 30hp pump conversion help

Home › Forum › Ask A Member › 1956 Evinrude 30hp pump conversion help

Viewing 3 posts - 11 through 13 (of 13 total)
1 2
  • Author
    Posts
  • September 7, 2017 at 6:53 pm #64487
    crosbyman
    Participant

      Canada Member - 2 Years

      the carb bowl will surely fill up for $15 why not just try one on shop around

      Joining AOMCI has priviledges 🙂

      September 7, 2017 at 10:13 pm #64501
      amuller
      Participant

        Trains, I’ve been fiddling with an Evinrude 85 hp V4, and found that the same fuel pump was apparently used for motors from 6 to 235 hp. (Above around 100 hp they used dual pumps.) Point being there is apparently a lot of excess capacity in these pumps. You can get a clone on Amazon for around $20 and on ebay for less. The Briggs style pumps apparently work too, if you don’t care that the setup doesn’t look original. I got one from China for around $5.00 shipping included, but haven’t tried it yet.

        September 8, 2017 at 1:09 am #64514
        bigtrains
        Participant

          For the price, I’m going to give it a shot. I’m not concerned with being OEM. The boat has about 100 dings and still got a lot of looks with faded paint and torn seats. As long as it’s safe and runs good.

        • Author
          Posts
        Viewing 3 posts - 11 through 13 (of 13 total)
        1 2
        • You must be logged in to reply to this topic.