1980 12hp Evinrude Worktwin

This topic has 32 replies, 8 voices, and was last updated 5 years ago by Don.

Viewing 3 posts - 31 through 33 (of 33 total)

Author

Posts
June 24, 2021 at 12:12 pm #241141
Mumbles
Participant
The motor seems to have a metric size driveshaft. 14mm is equivalent to 0.551″. The motor was built in Peterborough and we were well on our way to going metric back then.
June 25, 2021 at 4:00 pm #241235
dan-in-tn
Participant
US MEMBER PAY BY CHECK
How about this? I know it is the 14hp, but its the commercial model and based on the 15hp. Made from various motors past and recent. Hope this helps.

http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1988&hp=14
- This reply was modified 5 years ago by dan-in-tn.
June 25, 2021 at 9:54 pm #241257
Don
Participant
US Member
dan-in-tn wrote:

How about this? I know it is the 14hp, but its the commercial model and based on the 15hp. Made from various motors past and recent. Hope this helps.

http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1988&hp=14
- This reply was modified 5 years ago by dan-in-tn.
This one appears to have the larger gearcase from the 22CI engines…Hopefully the author of this post has ordered the correct parts book I found for him…
Author

Posts

Viewing 3 posts - 31 through 33 (of 33 total)

You must be logged in to reply to this topic.